Optima Steamer - Powerful Steam Cleaner (2023)

Published:

3/1/2022

A powerful mobile steam cleaner designed with the power and mobility of a pressure washer combined with the sanitizing power and water-conserving benefits of steam. The Optima Steamer design is the industry leader in steam-generating technology.

Optima Steamer - Powerful Steam Cleaner (1)

What is a steam cleaner?

A steam cleaner, oftentimes called a vapor steam cleaner, is a cleaning appliance that uses steam. A vapor steam cleaner allows the user to quickly clean, sanitize, and dry surfaces simultaneously.

How does optima steamer work?

The Optima Steamer was one of the first commercial-grade mobile steam cleaners to enter the market. It was introduced in 2004 by SJE Corporation for commercial and industrial applications. It serves as an alternative for applications where pressure washers would be too destructive. Before the Optima Steamer was released, mobile steamers used a coil system. This system created wet steam that was very similar to that of a pressure washer.

The engineer's behind Optima Steamers created a more advanced system, the single potboiler system. This combines the coil system's ability to heat up rapidly with a pressured pot-boiler system to produce vapor. The boiler is constructed of three layers to endure high temperatures and maximize combustion efficiency. Heat in the form of exhaust gasses is transferred down and up in the combustion chamber and is eventually released through the exhaust resulting in a pure vapor jet of steam. This process, reverse burning, increases combustion efficiency by 30%.

The Optima Steamer advanced boiler system allows the user to clean and sanitize simultaneously while never having to worry about pressure drops or changes in temperature.

Types of Steam - Wet Steam vs. Dry Steam vs. Superheated

The Optima Steam Cleaner uses superheated steam and has a moisture control feature so the user can choose between wet or dry steam. Wet steam is water vapor that produces water droplets while dry steam is just water vapor.

Wet Steam

Wet steam (condensed or unsaturated steam) is both a liquid and gas. It is formed by heating water in a flow-through coil to 212˚F (boiling point) producing a mixture of steam and water. Wet steam consists of more than 5% water which creates water droplets and is commonly used in the removal of grease, oil, residues, and other unsanitary build-ups. Wet steam uses more water consumption to produce more volume at the outlet to move debris off surfaces and away from the area.

Tip: Water causes corrosion. When using wet steam avoid cleaning fragile equipment such as turbine blades, low-pressure steam piping, and heat exchanges.

Dry Steam

Dry steam (or saturated steam) is a gaseous phase that is formed by heating water in a closed chamber to 212˚F (boiling point). Dry steam doesn’t contain any water droplets and is commonly used for barrel cleaning, food prep cleaning and sanitizing, control panels and conveyor line cleaning and sanitizing, auto detailing, removing bacteria, mold, yeast, and fungi. If dry steam is heated past the boiling point it becomes superheated steam.

Superheated Steam

Superheated steam is a gaseous phase, heating water at a very high temperature (above boiling temperature) and does not contain water droplets. Superheated steam is commonly used for steam engines, pest control, drying, cleaning, steam oxidation, curing, energy systems, etc.

Optima Steamer XD: Diesel-Powered Steam Cleaner

The Optima XD model is a compact steam cleaner made from polypropylene and polyethylene panels/tanks and 400 stainless steel, enamel-coated frame. Features include an LCD display, large water, and fuel tank, and visible gauges.

Optima Steamer XD Specifications:

  • Diesel-Heater, Electric Operation
  • 161,672 BTU/hr
  • 196.32 lb/hr Steam Capacity
  • 0.48 gal/min Flow Rate
  • 9.5 bar / 138 PSI Max Operating Pressure
  • 3.5 Min Preheat Time
  • 275˚F Spray Temperature
  • 304 Stainless Steel Boiler
  • 3.86 Gal Boiler Capacity
  • 352˚F Boiler Temperature
  • 450W Max Required Wattage
  • 9.5 Gal Water & Fuel Tank

Optima Steamer XD Applications:

  • Auto Detailing (Cars, Truck, Boat, RV, Aircraft, & Other Vehicles)
  • Exterior & Interior Vehicle Cleaning & Sanitization
  • Recreational Equipment
  • Farming Equipment
  • Municipal Cleaning
  • Mobile Cleaning Business
  • Sculpture & Monument Cleaning
  • Disaster Recovery
  • Wraps, Surface Decals, & Film Removal

The Optima XE model is an all-electric industrial steamer. Offers zero-emission dry steam cleaning. Is a durable steamer made from polypropylene and polyethylene panels/tanks, 400 stainless steel, enamel-coated frame, 304 stainless steel boiler, and 304 stainless steel immersion electric heaters. The Optima XE is available in three models and features a smart LCD monitor control system, dry & wet steam.

Optima Steamer XE Model 12K Specifications:

  • Stationary Dry Steam (All-Electric, 3-Phase)
  • 12,040W (12,200W Max)
  • 208V~600V 3-Phase Required Voltage
  • 15~35 Amps (Varies Based on Voltage)
  • 43.2 lb/hr Steam Capacity
  • 0.28 gal/min Flow Rate
  • 41,082 Max BTUs/hr
  • 9.5 bar / 138 PSI Max Operating Pressure
  • 11~13 Min Preheat Time
  • 248˚F Spray Temperature
  • 345˚F Boiler Temperature
  • 19 Gal Water Tank

Optima Steamer XE Model 18K Specifications:

  • Stationary Dry Steam (All-Electric, 3-Phase)
  • 18,040W (18,200W Max)
  • 208V~600V 3-Phase Required Voltage
  • 20~60 Amps (Varies Based on Voltage)
  • 52.9 lb/hr Steam Capacity
  • 0.30 gal/min Flow Rate
  • 61,555 Max BTUs/hr
  • 9.5 bar / 138 PSI Max Operating Pressure
  • 8~10 Min Preheat Time
  • 248˚F Spray Temperature
  • 345˚F Boiler Temperature
  • 19 Gal Water Tank

Optima Steamer XE Model 27K Specifications:

  • Stationary Dry Steam (All-Electric, 3-Phase)
  • 27,040W (12,200W Max)
  • 380V~600V 3-Phase Required Voltage (390V Min)
  • 30~50 Amps (Varies Based on Voltage)
  • 87.3 lb/hr Steam Capacity
  • 0.45 gal/min Flow Rate
  • 92,264 Max BTUs/hr
  • 9.5 bar / 138 PSI Max Operating Pressure
  • 9~11 Min Preheat Time
  • 248˚F Spray Temperature
  • 345˚F Boiler Temperature
  • 19 Gal Water Tank

Optima Steamer XE Applications:

  • Commercial Cleaning
  • Auto Repair & Body Shops
  • Animal Holding Facility Sanitization
  • Nursing Home Sanitization
  • Daycare Center Sanitization
  • Cleanroom Maintenance
(Video) Optima Steamer - Dry Steam Machine for Industrial cleaning and car wash /detailing

Optima Steamer Maintenance

How Do I Drain My Optima Steamer?

Drain Boiler

  1. Reduce pressure below 2 kg/ cm2 (28.4 PSI)
  2. Open the drain valve
  3. Leave drain valve open until next use

The boiler should be drained daily.*

Drain Water / Fuel Tank

  1. Optima XD Model: Open drain plug under the tank
  2. Optima XE Model: Disconnect the tank connection hose by pushing the fighting and pulling out the hose

The water tank and fuel tank should be drained monthly.*

How Do I Replace Water Filter For My Optima Steamer?

  1. Drain all water from the water tank
  2. Push the fitting and pull the hose
  3. Replace new filter
  4. Insert hose to filter and push it until connected

How Do I Replace Fuel Filter For My Optima Steamer?

  1. Open drain plug under the tank
  2. Drain all fuel from the fuel tank
  3. Pull the fuel hose to disconnect from the fuel filter
  4. Replace new fuel filter
  5. Push the fuel filter outlet into the fuel hose to connect them

Filters should be checked regularly and replaced if necessary. The water filter and fuel filter should be replaced monthly.*

How Do I Clean Probes On My Optima Steamer?

(Video) Steam Car Wash Machine - Optima Steamer (Full Version - English)

The most common issue is dirty sensors. Cleaning the High, Low, and Common Water Probe Sensors will do the trick.

  1. Let the unit cool down
  2. Open the steam valve
  3. Open the drain valve
  4. Remove the top cover and the front cover from the unit
  5. Disconnect wire(s) from water prob sensors
  6. Remove foam insulation from the probe
  7. Use a deep-socket wrench (14mm) to unscrew the water probe sensors
  8. Clean the probe tips with sandpaper or steel wool
  9. Clean the threads of each probe
  10. Re-wrap Wind Teflon tape 6 - 7 times on the thread
  11. Screw the probes back into the boiler vessel (Do Not over tighten)
  12. Reattach the probe sensor wires. Blue wire on the top high water probe sensor. The brown wire on the bottom low water probe sensor. The green wire on the middle common sensor.
  13. Replace cover and follow startup instructions

If the above steps didn’t fix the problem the water probe sensor(s) may be damaged and need to be replaced. The wiring is damaged and needs to be replaced.

Probes should be checked regularly and replaced if necessary. Probes should be checked and cleaned monthly.*

How Do I Clean Electrodes And Fuel Nozzles On My Optima Steamer?

It is recommended that you contact your dealer. Checking electrodes and fuel nozzles should be done every three months.

How Do I Descale My Optima Steamer?

It is recommended that you contact your dealer. Descaling should be done every six months.

How Do I Clean Cylinders Inside My Optima Steamer?

It is recommended that you contact your dealer. Cleaning the cylinder inside and removing soot should be done every six months.

Optima Steamer Troubleshooting

Common troubleshooting problems you can fix on the job. Can’t troubleshoot the problems, no worries! Bring your machine to our shop or contact us to schedule a service call and well get your machine working in no time.

No Lights & Alarm Sound But Power & Steam Switches Are On

This could be due to the power plug not being connected properly or a blown fuse. Check your electrical power source and power plug to make sure it’s not disconnected. Check to make sure the emergency stop switch isn’t pressed. If the machine lights are still off and there is no alarm sound, check the fuse to see if it needs to be replaced.

Refill Water Tank Icon is Red and Flashing

If the float switch is not detecting water in the water tank, this could be a result of water shortage or the float switch in the tank is defective. Check the water level of the tank and add water. If the problem persists, disconnect the wire from the float switch to see if the signal clears. If the error disappears replace connect wires and replace the float switch.

Refill Fuel Tank Icon is Red and Flashing

The fuel tank is low and needs to be filled or there is a malfunction with the float switch in the water tank. Disconnect the wire from the float switch to see if the signal clears. If the error disappears replace connect wires and replace the float switch.

Boiler Level Error Icon is Red and Flashing

This means the boiler water level is low. Check the water filter and replace it if dirty. Check the water pump and water probe sensors, clean, and replace if necessary.

Pressure Switch Error Icon is Red and Flashing

Defrost the machine and/or replace the 8.5 bar pressure switch. If the water probe sensors are the cause, clean or replace all the water probe sensors of the boiler.

Water Pump Overrun Error Icon is Red and Flashing

Experiencing the water pump running over time due to water filter blockage, malfunction of the water pump, or the water probe sensors. At initial operation, the water pump has a run time limit of three minutes for the XD model and five minutes for the XE Model. The water pump is programmed to run up to 60 seconds once the low water probe sensor detects water.

Check the water filter, if it is dirty replace it. Check the water pump and water probe sensors, clean or replace if needed.

Thermistor Error Icon is Red and Flashing

(Video) Optima steamer XD demonstration . Automatic repair company 131 florida st farmingdale NY. 11735

The thermistor detects the low temperature (under 32˚F). Cold weather can trigger low-temperature detection. Defrost the machine and try again, if the problem persists, replace the thermistor.

Display Error Code

DT32 or ET32

This means the thermistor has been shorted and needs to be replaced.

DT33 or ET33

This means the thermistor has detected high temperatures, over 392˚F. This could be a result of the pressure switch or thermistor malfunctioning and needs replaced. Replace the 8.5 bar pressure switch.

Flame Detecting Error Icon is Red and Flashing

Flame Detection Fault

Check and clean components of the combustion chamber and check the blower fan. Check the fuel filter or fuel pump for any signs of malfunction and replace if needed. The flame detector and pressure switch (8.5 bar pressure switch) could be malfunctioning and needs to be replaced.

Abnormal Detection of Flame Detector

The flame sensor has been exposed to light from outside. Check the rubber packing on the flame detector and replace it if needed.

Boiler Pressure Above 9 bar (130 PSI)

Malfunction of the pressure switch or water probe sensors can cause this. Replace the pressure switches, clean or replace the water probe sensors of the boiler if needed.

Using distilled water can also cause this. Use normal tap water (above 15 ppm).

Machine Is Leaking Water or Steam

During the cold months, it's likely due to the Y-strainer cracking or the piping line. Thaw the machine, inspect it for any other damage and replace the Y-strainer and other parts if necessary.

In other cases, the safety valve broke due to overpressure. If the safety valve opened below 8 bar, replace the valve. If the safety valve opened over 8 bar, then contact your distributor.

Water Supplying Tube of Water Pump is Hot

Replace the non-return valves and damaged parts.

Water Tank is Abnormally Hot

Clean or replace the air purge valve. If the problem persists replace the thermistor.

Static Electricity on the Spray Gun or Machine

This results from the machine not being grounded properly. Use the grounding chain located at the rear bottom of the machine.

NorTex Sales and Service

NorTex Sales and Service (Hotsy Certified Dealer) is an industry leader in commercial cleaning equipment. NorTex technicians are industry experts, knowledgeable of all equipment, and able to fix any problem.

(Video) Mobile Car Detailing Machine (Steam Car Wash Business)

If you run into any problems with your machine, give us a call or put in a service/repair request. You can also bring your machine to our shop to have a service technician take a look at it. We are located in Kilgore, Dallas, and Odessa.

Optima Steamer - Powerful Steam Cleaner (3)

Benefits of Optima Steamer: Commercial Steam Cleaner

Optima Steamer - Powerful Steam Cleaner (4)

Steam Cleaning FAQ: What Can You Steam Clean

Share this Article ↓

Floor Scrubbers: Why Choose a Floor Scrubber?

Published: 9/07/2022 Floor scrubbers are conquering the market. Preserve your facility’s appearance by keeping your floors clean in less time,...

HVLS Fan Buying Guide: Everything to Know Before Purchasing

Published: 9/01/2022 What is HVLS? How do HVLS Fans Work? Where do HVLS Fans get installed? Check out this article...

Floor Sweepers: Why Choose a Floor Sweeper?

Published: 9/01/2022 Floor sweepers are the prodigy of sweeping with a broom. No more bending down or leaving traces of...

Back to Blogs

Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device

(Video) Optima Steamer Demonstration: Cleaning with Dry Steam

FAQs

How do I use my Optima Steamer? ›

Products Christina can easily increase the steam temperature by simply bringing the nozzle closer to

How do you get the best results with a steam cleaner? ›

Keep the steam mop moving constantly as you wash, and don't allow it to idle on any given spot. Change the pad as it grows dirty, as you don't want to simply spread dirt around the floor. For thorough cleaning, you might want to make multiple light passes over the entire floor.

Why is my steam cleaner not working? ›

Heating Element. A common cause to your cleaner not producing steam can be a failed heating element. As the heater is used to heat up the water, if that has ruptured or burnt out your steam cleaner will not produce any steam. With the water tank filled and switched on the steamer should sound like a boiling kettle.

What is steam car wash? ›

A steam car wash is an environmentally friendly process that uses steam to clean the interiors and exteriors of a vehicle. The use of a steam jet as a cleaning tool for surfaces is safe. This method has excellent sterilizing and cleaning power; however, care should be taken to use it correctly.

Can I put vinegar in my steam cleaner? ›

To kill offensive odors present in your carpet, upholstery, and other furnishings quickly, fill your steam cleaner's solution reservoir with a 1/2 cup of white distilled vinegar and the remainder with hot water. Do not add a soup solution. The vinegar and hot water solution will neutralize the odor and remove it.

What happens to the dirt when you steam clean? ›

The vapor loosens dirt and kills dust mites, mold, staph, and other allergens and harmful bacteria. No suction is required, since the high-heat moisture dries quickly. For heavily soiled surfaces, some manufacturers suggest steam-cleaning first, then wiping away dirt with a cloth before the moisture dries.

Can you put vinegar in a steamer? ›

Vinegar is regarded as a descaling agent. According to Bissell, you should not add anything else to the steam mop apart from distilled or demineralized water. This is because it may cause damage to the internal components of your Bissell steam mop.

How do you unclog a steam cleaner nozzle? ›

How to Unclog Steam Mops
  1. Unplug your steam mop and let it cool completely. ...
  2. Insert a paperclip into the spray tip opening to remove any possible clog.
  3. Pour vinegar through the mop head to clear any clogs located there.
  4. Reassemble your steam mop and fill the reservoir with water before attempting to use it again.

How do you Decalcify a steamer? ›

For a thorough decalcification, run the steamer with the water tank filled with 1/3 white vinegar and 2/3 distilled water until half the amount has steamed. Then leave the steamer unplugged for 30 minutes before dumping out what's left of the mixture in the tank.

Why is my steamer mop not steaming? ›

First, check to make sure the unit is plugged in and is in a working outlet. Next, check to make sure there is water in the tank. It is very important to make sure you are ONLY using water to fill the tank. Other solutions may cause breakdown of the gasket and/or other parts of the machine.

Can you steam clean doors? ›

Glass shower doors can also be cleaned using a steam cleaner. Hard water and minerals build up easily on glass shower doors and they lose their beautiful appearance! Steam cleaning can help wipe away hard water stains when you use a soft bristle brush.

Can you steam clean glass shower doors? ›

Fill SteamMachine with DISTILLED WATER and let it preheat per instructions. 2. In your first section, spray the glass with vinegar, letting it soak around 2 minutes. on your SteamMachine, scrub the glass from top to bottom while steaming.

Why is my floor sticky after I steam mop? ›

Sticky floors after steam mopping are often the result of residue from cleaning products that had been used on the floor. Using a dirty mop pad also can cause sticky floors.

Will steam cleaning damage car paint? ›

Steam cleaning keeps the surfaces fresh

The chemicals and brushes used in the normal cleaning process cause unnecessary damage to your paintwork and other surfaces, eventually dulling the appearance of your car inside and out.

How long does it take to steam clean a car? ›

A New Way of Cleaning

Using “dry” vapor steam produced by the Optima Steamer, a practiced operator can clean the exterior of a typical passenger car with as little as 1 gallon of water and can do it in as little as 15 minutes (obviously, your results may vary).

Is steam cleaning good for cars? ›

Steam cleaning your car enables users to clean up dirt within the paint without damaging it. Choosing steam is an excellent choice when cleaning and disinfecting your vehicle because the high temperatures actually kills and denatures harmful bacteria and microorganisms.

How do I make my floor smell good with a steam mop? ›

If so, adding a few drops of orange, lemon or lavender essential oil on the steam mop cover will not only disinfect the floors, but make your house smell great in the process!!!

Can I steam my mattress? ›

Steam cleaning – sweat, dirt and stains can easily penetrate beyond the top layer of your mattress so treat it to a steam clean every few months. Vacuum the mattress first, run the steam cleaner across the whole surface then allow to dry.

Can you steam clean windows? ›

Absolutely. Using steam to clean windows is one of the most effective and easiest methods to use. A steam cleaner is the ultimate cleaning machine that uses hot steam to remove all forms of dirt and grime from windows.

Can a steam cleaner clean a couch? ›

Steam cleaning is one of the best ways to clean upholstery because the warm moisture lifts stains without releasing too much moisture into the fabric and padding. The main elements of steam cleaning that make it so effective are: Moisture.

Can I use my steam cleaner to clean my oven? ›

If You Have a Handheld Steam Cleaner:

If your oven has no steam-clean function but you have a steam cleaner, you can use the device on your oven's glass, metal, and enamel, employing the brush or scraper attachment on grease and baked-on crud. Just remember that steam is hot!

How long does it take furniture to dry after steam cleaning? ›

Steam Cleaning Dry Within Hours

Depending on the type of fabric, after your upholstery steam cleaning your furniture will be dry within 2 to 6 hours.

Can I put Pine Sol in my steam mop? ›

Q: Can I use Pine-Sol® Squirt 'N Mop in a steam cleaner? A: No. Pine Sol® products were not designed to be used in steam cleaners.

What can you put in a steam cleaner? ›

You should not add anything other than water to a steam cleaner/mop tank, unless it is recommended by the manufacturer. If the manual says to add water only, adding any kind of cleaning solution, essential oils, dish soap, or other cleaning fluids puts the machine at risk of damage and voids the warranty.

Can I steam clean wood floors? ›

Sealed hardwood floors can withstand the moisture and heat from a steam mop, and they clean really nicely with a streak-free finish. However, avoid using a steam mop on unsealed hardwoods, as they're more vulnerable and easily damaged by excessive moisture.

Why is my steamer spitting water? ›

When too much water is added to the water tank, the boiling water will start to “spit” out of the steam nozzle. To prevent this from happening, please be sure to only fill the water tank to the “MAX” line as indicated on the water tank of your Hand Held Steamer.

Does steam cleaning remove limescale? ›

Does steam cleaning remove limescale? Steam cleaning can remove limescale effectively. In fact, not only does the high temperature of the pressurized steam break down limescale and hard water stains, it kills and disinfects up to 99.9% of bacteria and germs in kitchens, toilets, and bathrooms.

Can I put vinegar in my Shark steam cleaner? ›

To prolong the life of your steam mop, we recommend using distilled water in the tank. Make sure you only add water to the tank – chemicals or cleaning solutions (including vinegar) may damage the steam mop and could be unsafe. For best results, sweep or vacuum your floors prior to cleaning with your steam mop.

How do I clean my steamer without vinegar? ›

If your steamer has a hose attachment, you should clean that, too. Simply detach the hose and flush it with water. You can do this outside with a garden hose, or carefully in the kitchen sink or shower. Flush the hose several times, or until the water runs clear once it filters out of the hose attachment.

Should you use distilled water in a steamer? ›

Overall, distilled water is one of the best types of water to use in clothing steamers. In fact, you'll find that many clothing steamers out there specifically call for the use of this form of water because it increases the steamer's durability and performance.

What is white vinegar used for? ›

White vinegar typically consists of 4–7% acetic acid and 93–96% water. It can be used for cooking, baking, cleaning and weed control and may aid weight loss and lower blood sugar and cholesterol. Consumption is safe in moderation but could be dangerous in excess amounts or alongside certain medications.

How long do steam mops last? ›

As for the unit itself, a Shark steam mop lasts between 1 to 3 years, depending on how often you use the steam mop and how well you maintain it, including decalcifying the steam mop and unclogging the nozzles.

Why is my steam mop leaking? ›

The most common reason why a Bissell steam mop is leaking out from the back vent is because of a cracked or damaged cap on the water tank. Often, the rubber gasket on the tip is damaged, causing the machine to not produce an efficient steam and leak water out the back vent.

Why did my Shark steam mop stopped steaming? ›

Shark Pocket will not make steam

Check that your water tank is full, if you find it is empty, add water. Also check that the tank is free of any cracks or holes that could cause water to leak, and that the tank is properly seated in the device's housing.

Can I put fabric softener in my steam mop? ›

Don't Use Fabric Softener or Dryer Sheets on the Mop Cloths

Most steam mop pads can be cleaned in the washer with like-color items. And it's typically best to let them air dry to maintain their integrity. Also, many mop pads are microfiber, which can be damaged if it's washed with fabric softener or a dryer sheet.

Does steam cleaning remove limescale? ›

Does steam cleaning remove limescale? Steam cleaning can remove limescale effectively. In fact, not only does the high temperature of the pressurized steam break down limescale and hard water stains, it kills and disinfects up to 99.9% of bacteria and germs in kitchens, toilets, and bathrooms.

Can you use essential oils in a steam mop? ›

If so, adding a few drops of orange, lemon or lavender essential oil on the steam mop cover will not only disinfect the floors, but make your house smell great in the process!!!

Are handheld steam cleaners worth it? ›

Handheld steam cleaners are especially useful for cleaning your bathroom and kitchen quickly and effectively, removing accumulated dirt and stains. A quality steam cleaner will remove dirt from all hard surfaces and even from upholstery or fabric.

What detergent can I use in my steam cleaner? ›

The Best Detergents to use with a steam mop or steamer are: Windex Multi-Surface & Disinfectant Spray (Works really well with a steam mop or steamer to clean & disinfect your floors & other surfaces) Puracy Multi-Surface Spray (A mild cleaner that uses organic & eco-friendly ingredients)

Can I put lemon juice in my steam mop? ›

Then I get out my trusty Bissell Powerfresh Steam Mop. This thing is literally a lifesaver. Gone are the days of a mop, icky water, and puddles that get left on the floor. Simply fill the compartment with 1/2 cup vinegar, the rest of it with water and if you want, a little squeeze of fresh lemon juice.

Can you steam clean a toilet bowl? ›

When sanitizing with a steam cleaner, you can skip harsh chemicals to disinfect the bathroom and clean the toilet bowl. The power and heat of the steam will do the job of blasting away all harmful organisms.

Can you steam clean glass? ›

Absolutely. Using steam to clean windows is one of the most effective and easiest methods to use. A steam cleaner is the ultimate cleaning machine that uses hot steam to remove all forms of dirt and grime from windows.

Can you steam clean glass shower doors? ›

Fill SteamMachine with DISTILLED WATER and let it preheat per instructions. 2. In your first section, spray the glass with vinegar, letting it soak around 2 minutes. on your SteamMachine, scrub the glass from top to bottom while steaming.

What can I put in my floor steamer to make it smell nice? ›

You should not add anything other than water to a steam cleaner/mop tank, unless it is recommended by the manufacturer. If the manual says to add water only, adding any kind of cleaning solution, essential oils, dish soap, or other cleaning fluids puts the machine at risk of damage and voids the warranty.

Can I put Pine Sol in my steam mop? ›

Q: Can I use Pine-Sol® Squirt 'N Mop in a steam cleaner? A: No. Pine Sol® products were not designed to be used in steam cleaners.

Can you put detergent in steam mop? ›

Can I use detergents with my steam cleaner? Most steam cleaners are designed to be used without detergent, so stick to water only with these. Some models, on the other hand, can be used with detergent – follow the manufacturer's instructions.

Can I steam clean a carpet? ›

Yes, steam cleaners can clean carpets. It does so utilizing steam from the hot water inside its reservoir. You'll need a machine with a nozzle (with a brush) and a tube to use it on carpets. Also, look for a model with a microfiber attachment to apply steam evenly.

Is it OK to steam clean hardwood floors? ›

Although it may be tempting to deep clean your hardwood floors with a steam mop, don't. “Drastic temperature changes and moisture may warp the wood,” says Steve Stocki, manager of marketing and merchandising at Lumber Liquidators. That's true whether you have solid or engineered wood floors, and for bamboo, too.

Videos

1. The Most Powerful Steamer at Arirang TV (Professional Steam Cleaner)
(OPTIMA STEAMER)
2. Steam Extractor Hand Tool for Steam Cleaner (Optima Steamer)
(OPTIMA STEAMER)
3. Amazing Steam Cleaning Machine - OPTIMA Steam Cleaner
(OPTIMA STEAMER)
4. [REVIEW] Amazing Safety Features of Industrial Steam Cleaner, OPTIMA STEAMER
(OPTIMA STEAMER)
5. Steam cleaning a dirty mat with the Optima Steamer
(Taylor Mobile Detail)
6. Optima Steamer, Powerful Industrial Steam Cleaner / Cleaning Machine
(OPTIMA STEAMER)
Top Articles
Latest Posts
Article information

Author: Carlyn Walter

Last Updated: 26/10/2023

Views: 6389

Rating: 5 / 5 (70 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Carlyn Walter

Birthday: 1996-01-03

Address: Suite 452 40815 Denyse Extensions, Sengermouth, OR 42374

Phone: +8501809515404

Job: Manufacturing Technician

Hobby: Table tennis, Archery, Vacation, Metal detecting, Yo-yoing, Crocheting, Creative writing

Introduction: My name is Carlyn Walter, I am a lively, glamorous, healthy, clean, powerful, calm, combative person who loves writing and wants to share my knowledge and understanding with you.