This Article Applies to:
Archer C1200 , Archer C5400 , Archer A2600 , Archer AX55 , Archer C4 , Archer C5200 , Archer AX53 , Archer C5 , Archer AX10 , Archer C2 , Archer AX51 , Archer AX96 , Archer A2200 , Archer C6U , TL-WR1043N( V5 ) , Archer C80 , Archer AXE95 , Archer C8 , Archer AX10000 , Archer C3150 , Archer C9 , Archer AX50 , Archer C6 , Archer C7 , Archer AX90 , Archer AX6000 , Archer C5400X , Archer C25 , Archer C24 , Archer A20 , Archer A64 , Archer C60 , Archer C2600 , Archer A1200 , Archer C21 , Archer C20 , Archer C64 , Archer AX1800 , Archer AX206 , Archer C59 , Archer C58 , Archer AX4200 , Archer C3200 , Archer C900 , Archer A2 , Archer AX75 , Archer AX4400 , Archer C3000 , Archer AX73 , Archer C50
The "This Article Applies to" section is not updated in a timely manner, to determine if your model supports a specific feature, please refer to the Specifications page of the corresponding product on the TP-Link website.
Some ISPs need configure VLAN ID for internet connection, like Singtel, Unifi, Maxis, Viettel, MEO, Vodafone, NBN, UFB and so on.This article will guide you configure the VLAN ID via two methods: Quick Setup and IPTV.
Note:
1. If your internet works fine, please ignore this article and just keep the IPTV settings as the default.
2. In this article, we will take Archer AX50 as an example.
3. This article suits users who need to set a VLAN ID for internet connection.
Method 1. Configure your VLAN ID during Quick Setup
Step 1: Log in the web interface page of TP-Link router by referring to How do I log into the web-based Utility (Management Page) of TP-Link wireless router?
Step 2: Click Quick Setup. After selecting your Time Zone, you’ll see the Internet Connection Type Page. Then click Additional ISP Settings to open the option.
Step 3: There are many modes available in ISP Profiles.
1). If your ISP is in the list, select your ISP and click Save. We have included the correct parameters of these modes (including Singtel, Unifi, Maxis…), just select and Save.
2). If your ISP is out of the list, select Custom mode and then you will be required to fill the parameters as below.
Attention: double check with your ISP about the information required as below if you are not sure.
Note:
1. Type the VLAN ID provided by your ISP for the Internet VLAN ID. For example, DoDo NBN provides VLAN100 for Internet service, DoDo user should type 100 for Internet VLAN ID.
2. Check the option of 802.1Q Tag and leave the priority as the default.
3. Type two different random number (between 2 and 4094) for IP-Phone VLAN ID and IPTV VLAN ID.
4. Choose Internet for all the LAN ports and click Save.
Method 2. Configure VLAN ID correctly via IPTV (function)
Step 1: Log in the web interface page of TP-Link router by referring to How do I log into the web-based Utility (Management Page) of TP-Link wireless router?
Step 2: Click Advanced > Network and you can get into The IPTV setting page easily.
Keep the IGMP Proxy and IGMP version as default, unless your ISP told you to modify.
Note: Only some of the models have the IGMP Proxy and IGMP option.
Step 3. Fill in the IPTV parameters as the same way mentioned in Step 3 of Method 1.
Now you can enjoy your internet!
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.
Is this faq useful?
Your feedback helps improve this site.
What’s your concern with this article?
- Dissatisfied with product
- Too Complicated
- Confusing Title
- Does not apply to me
- Too Vague
- Other
We'd love to get your feedback, please let us know how we can improve this content.
Thank you
We appreciate your feedback.
Click here to contact TP-Link technical support.
